Ken Block Vinyl Sticker Memorial Car Decal 3 Pack

3 Pack Ken Block Vinyl Sticker Memorial Car Decals
Can be requested to be sold separately, or in pairs. 
These stickers are in memory of the late great Ken Block. 
Options are:
43 Wings - 10 x 11cm
43 Wings Outline - 9 x 12cm
Ken Block Car Outline - 6 x 19cm
Or why not get all 3?
These are high-quality Vinyl Stickers, 
if you would like this in a different colour please contact us after purchase
other wise you will receive a gloss black set  
We recommend that you consult your local sign making fitting company, But you can install these graphics yourself. If unsure of your fitting capabilities we recommend that you watch youtube fitting guides.
 
Applying your vinyl Graphics ensure the surface is clean and free from dust or grease. Graphics are suitable for dry or wet application method. We cannot be held responsible for incorrectly or badly installed products. I.e trapped air bubbles, or ripping of the vinyl if you do not take your time when installing your product.
 
Application Instructions For Decals
Follow These 7 Easy Steps
1. Place design face up on a flat surface and with the plastic card rub over the graphic ensuring the entire graphic has adhered to the application tape.
 
2. Turn over the graphic face down and begin to peel away the backing paper slowly ensuring the graphic is stuck to the application tape. Carefully replace wax paper and refer to step 1 if the graphic is still stuck to the wax paper.
 
3. With the wax paper now removed ensure the application surface is clean and dry before continuing. A generic glass cleaning spray will do the job great, wipe clean and dry with a lint free cloth.
 
4. Carefully line up your graphic on to your chosen location ensuring no pressure is applied to the graphic itself until you are happy. For large graphics it is recommended that the chosen location is marked out before application.
 
5. Using the plastic card apply pressure to the graphic starting from the middle and work outwards smoothing out any creases or air bubbles as you go.
 
6. Starting at one corner gently pull away the application tape at 180 degrees to the graphic ensuring the graphic has stuck, if not replace application tape and rub over until it adheres.
 
7. Finally check your graphic for any air bubbles present, if there are use a pin or a needle and gently prick the bubble and apply light pressure to remove it.

***Buyers outside of the United Kingdom***
Please note that this item MAY incur additional customs charges
when imported into your country
Any import charges are to be paid by the buyer and are not the responsibility of North West Vinyl Graphics 

Free 2nd class Shipping UK.
UK Customers You Can Upgrade To 1st Class for an Extra Cost of £0.40p.
Europe Royal Mail International Standard This Can Take up to 2 weeks
World Wide and  Royal Mail International Tracking, This Can Take up to 4 weeks.
These Cost are due items taking longer to get to there destination's.